Victor wants to CREATE!
(08-14-2016, 01:05 PM)Heliux Wrote: mmm. dem planes and dat brush economy doh. 'D:


Those studies that I've made on the past few weeks helped me a lot to understand the planes and improve my brushwork! :)

Did another study in grayscale, those are helping me a lot to understand the planes of the face and how lighting works, also improving my rendering, I feel that I'm not struggling like before to render. 

[Image: OdsVzY7.jpg]

A guy from Brazil trying to get into the entertainment industry as a designer.

My Sketchbook
Reply
Did another one on my free time. I struggled less to start the painting and find the values, but I still prefer the last one, I think it has more juice, the lighting is more dramatic, and freckles, of course.

[Image: gnZdRdk.jpg]

A guy from Brazil trying to get into the entertainment industry as a designer.

My Sketchbook
Reply
Cool stuff, man. These portraits are coming along well.

I think you have a tendency to over-moddel form with your values and I would suspect that this has to do with a lack of form along the edges of your contours. There's always a tendency where if you lack something, you naturally overcompensate with something else. So in the future, pay attention to the contours more. This is where you'll find a lot of overlaps and halftone shapes that really give things a sense of real form. In these portraits, take a closer look at the shapes and values in the jawline to see if you can find those qualities that make it feel three-dimensional :)

Discord - JetJaguar#8954
Reply
(08-19-2016, 10:53 PM)Tristan Berndt Wrote: Cool stuff, man. These portraits are coming along well.

I think you have a tendency to over-moddel form with your values and I would suspect that this has to do with a lack of form along the edges of your contours. There's always a tendency where if you lack something, you naturally overcompensate with something else. So in the future, pay attention to the contours more. This is where you'll find a lot of overlaps and halftone shapes that really give things a sense of real form. In these portraits, take a closer look at the shapes and values in the jawline to see if you can find those qualities that make it feel three-dimensional :)

Hey Tristan, thanks for the critique!

I think that the edges was where I find myself struggling more then the rest of the painting, but I don't know if I understand what you meant by over-modeling the form with the values. You meant that because I can't show the form correctly on the edges and mainly on the jawline, that I have a tendency to push the forms on the rest of the painting and also don't show it correctly?

A guy from Brazil trying to get into the entertainment industry as a designer.

My Sketchbook
Reply
Yeah that's basically it. The thing about light hitting form is that it doesn't create a lot of value variation where it hits. Light is relatively fairly flat and exponentially looses "light" as form turns away. So if something horizontal is getting 100% of the light, something that is at a 45 degree angle isn't getting 50% of the light, it's actually getting quite a bit more. Check out this Sargent painting http://www.wikiart.org/en/john-singer-sa...n=referral

If you squint, it's not a lot of value variation in the light. Most of it happens at the edge where light turns away into shadow. Now contrast this with the last portrait on the previous sketchbook page. The values change sort of everywhere. A good example you may have experienced would be if you've ever rendered some portrait a lot and then suddenly it looks like their skin is made out of metal. This is usually because the unity and integrity of the light (and it's values) has been compromised in order to push more and more form, making it "too much".

Another example would be the lips of this last girl you posted. There's a lot of value variation around her upper lip and I believe that there would be some, but it looks like you've pushed the values too far so they look over-modelled. The way we see stuff is by comparing contrasts and if you say the there is a lot of variation on something that is relatively flat, you have less "umph!" when you really want to turn the form through value variation because if a slight variation in form changes the value a medium amount, when you then chooses to vary it a lot, it's less impressive. So a simple way of looking at it is that if something is over-moddeled through value, all other value variation becomes "meh" in comparison.

Also, check out this Edelfelt painting https://www.flickr.com/photos/gandalfsga...6946719704 . Download the full size, open it up in photoshop and just zoom in and look at the edges of the contour and the edges of where light turns into shadow. This is really the place where we see a close study of values and shapes. The middle of forms don't really have a lot of value variation it's at the edges that we see that good stuff ;)

There is also some value compression stuff I could get into but I've already taken up enough space in your sketchbook with this very long text. The TL;DR of it would be to make your darkest dark and dark mid-tones closer together on the value scale so you have more room to play with the values in the important areas of your painting. This would simultaneously allow you to introduce more contrast in the subject's mid and light tones but it wouldn't look over modelled because the darks are compressed so you've established relatively more room to play with. The simple rule of thumb to go by is to push your darks and lights closer together to allow for better value mapping (my profile pic is an example of this taken to the extreme where both sides of the value scale are heavily compressed, there's a bigger pic in my SB if you're interested)

These are still good paintings, man. I like your work, just a little tweaking and you're gonna make some great stuff!

Discord - JetJaguar#8954
Reply
Hey Tristan, thank you very much for the explanation! I can see what you mean now, makes perfect sense! I'll take those paintings that you've linked and try to understand better and try to apply it on my next study. Anthony Jones talks a lot about contrast in the Learn Squared lessons, but I've never thought it about the way you've explained.


Thanks once again man, and feel free to drop by to give me crits, that's what I need the most :D

A guy from Brazil trying to get into the entertainment industry as a designer.

My Sketchbook
Reply
Tried to pay more attention on the edges and what Tristan told me about over-modeling. tried to keep the values grouped more. It was really hard to keep this in mind and deal with the skin texture at the same time, and old people have a lot of texture :P


[Image: I6iM1Ga.jpg]

A guy from Brazil trying to get into the entertainment industry as a designer.

My Sketchbook
Reply
I did a 1 hour still life in my spare time today. Forgot how hard and how valuable those studies are, it's really tricky to translate something with color and tri dimensional from the real world to a 2d value painting. Learned a lot with this one, I'll do much more of those :)

[Image: zknRMcU.jpg]

A guy from Brazil trying to get into the entertainment industry as a designer.

My Sketchbook
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)